Honest Pro is a new-generation professional diode laser hair removal system operating at 755, 808, and 1064 nm. The three wavelengths give the platform a broader working range across different hair structures and skin characteristics. The system is manufactured in Switzerland using components of European origin. Below, we follow the energy path from wavelength selection to controlled heating and cooling.
How Honest Pro uses 755, 808, and 1064 nm
Wavelength controls how strongly laser light interacts with melanin and how deeply the energy penetrates tissue. Melanin is the pigment in hair that absorbs laser light and converts it into heat. Its absorption gradually decreases at longer wavelengths, while penetration depth increases toward the 1064 nm range.
| Wavelength | Melanin interaction | Penetration depth | Role within Honest Pro |
|---|---|---|---|
| 755 nm | Higher absorption | Moderate | Extends the working range toward finer, superficially located pigmented hair |
| 808 nm | Strong absorption | Greater | Forms the central spectral range of the diode platform |
| 1064 nm | Lower absorption by epidermal melanin | Greatest of the three | Extends energy delivery toward deeper follicular targets |
At 755 nm, melanin absorbs a larger share of the incoming light. This makes the wavelength useful when the target is finer pigmented hair located closer to the surface. Its penetration remains close to the 800 nm range. The main change here is the balance between optical absorption and the amount of energy that reaches deeper tissue.
The 808 nm wavelength sits in the established working range of professional diode hair-removal systems. Melanin still provides a strong optical target. The light reaches follicular structures effectively. Honest Pro then extends the spectrum to 1064 nm, where epidermal melanin absorbs less energy and penetration depth increases.
Used within one platform, this wider spectral range gives the specialist more room to match laser–tissue interaction to the structure of the hair and the skin's pigment profile.
How laser energy reaches the hair follicle
Laser hair removal works through selective photothermolysis: melanin absorbs laser light and converts it into heat. The pigmented hair becomes the initial absorber, then thermal energy reaches follicular structures involved in producing new hair.
The process can be followed step by step:
- Laser light reaches the pigmented hair inside the follicle.
- Melanin absorbs part of that optical energy.
- The absorbed energy is converted into heat.
- Heat spreads into follicular structures involved in subsequent hair growth.
This also explains why hair pigmentation influences the response to laser treatment. A stronger melanin target absorbs more of the selected wavelength and transfers more thermal energy into the follicular unit.
How Honest Pro manages energy and heat during treatment
Honest Pro combines controlled laser output with contact cooling at the treatment interface. The thermal effect starts with the energy dose delivered to the tissue and the time over which it is delivered. Contact cooling then manages heat at the skin surface.
Four technical elements describe this process:
- Wavelength sets the spectral interaction between laser light, melanin, and tissue.
- Fluence describes the energy delivered per square centimeter, expressed in J/cm².
- Pulse duration defines how long the selected energy is delivered during one pulse.
- Contact cooling draws heat away from the surface of the skin.
Honest Pro is designed for stable fluence delivery. Once a treatment parameter is selected, consistent output keeps the delivered energy at the intended level as the specialist works across the treatment area. Pulse control determines the timing of that delivery and shapes the thermal response around the follicular target.
Cooling works at the other side of the thermal process. The treatment interface removes heat from the epidermis while laser energy is being absorbed below the surface. This reduces the thermal load on the outer skin layer and increases the temperature margin available for heating the follicular target. Contact cooling is an established method of epidermal protection in laser hair removal.
Manufactured in Switzerland
Honest Pro is manufactured in Switzerland at Frohheimstrasse 2, 9325 Roggwil TG, using components of European origin.
The location is the manufacturer's fixed Swiss base and a point for official inquiries. A registered Swiss legal entity stands behind the equipment, with a permanent corporate address and a direct route for documentation requests or business communication. Clinics and partners therefore deal with a traceable European manufacturer rather than a reseller of China-origin equipment.